Zebsboards Forum

Check for a comport conflict between the plunger and whatever scripts you are using (freezy's dmd script is usually the culprit)

Also if you are using pin2dmd make sure they are on separate com ports.

Hi. I never got an email regarding a return. You're welcome to send it back for me to have a look at. Just click on the Service/Terms link on the front page of the store and all of the info is there..... https://shop.zebsboards.com/terms Stock software shouldn't be an issue, FP can be a bit of a pai...

Hi again,

Email would definitely be the best way to go.

Drop me a line and I'll work it out with you.

Thanks!!

Hi, Sorry for the late reply, I didn't get a notification on this and it's a pretty quiet forum most days. The lighting board itself is capable of only 1 5m 12V RGB ledstrip but since there are 12 High power outputs that are open after the kit is assembled it's an easy matter to use 3 of those and c...

That sounds about right, I've never used popper myself so I'm not 100% on it but what you describe sounds like it should work. The difference between the bat files and the vbs files is that the bat files aren't hidden. When you run one it will open and close a command box. The vbs file just runs the...

You don't need xpadder or anything, just switch the plunger from keybaord mode to gamepad using the serial commands. The buttons in the gamepad control panel applet only work as gamepad buttons in gamepad mode, otherwise they are keystrokes and don't show up as button presses. All of this is covered...

https://www.zebsboards.com/forum/ext/dmzx/fileupload/files/9571073fc3b3dba56c99aa46c868e8de.jpg https://www.zebsboards.com/forum/ext/dmzx/fileupload/files/e960a009a62e9951c1ea2955cfe65d6a.jpg https://www.zebsboards.com/forum/ext/dmzx/fileupload/files/d2b46ab105d782dd5494caf66820e6c5.jpg https://www...

The solution is somewhere in your software environment. Looking at your settings in the image you linked to previously you haven't assigned any axis to the nudge settings, you need to link the x and y axis to the respective input setting. The way to check the hardware function is to verify the opera...

I'm sure that you will ....