Hi,
Make sure that you have the plunger plugged into a USB2.0 port if available. If you don't have one a USB2.0 hub into a USB3.0 port will work.
Not all USB 3.0 controllers used on the mainboard of the computer are universal for USB2.0 for some reason.
As I can no longer find the time to combat the continued attacks on the forums they will be closed over the next few weeks. Assistance emails can be sent to support@zebsboards.com however, please be patient as I am currently focused on efforts to get the store functioning properly. Thank you for your understanding.
Search found 136 matches
- Tue Sep 15, 2020 7:57 am
- Forum: V3 Support
- Topic: Keys work, plunger does not
- Replies: 2
- Views: 2265
- Mon Sep 14, 2020 11:36 am
- Forum: V3 Support
- Topic: Plunger Bootloader Port Finder Utility
- Replies: 0
- Views: 818
Plunger Bootloader Port Finder Utility
Utility for locating the bootloader com port of your zebsboards plunger.
Follow the instructions in the README in the zip file.
Download zip file from HERE
Follow the instructions in the README in the zip file.
Download zip file from HERE
- Sat Sep 12, 2020 12:18 pm
- Forum: V3 Support
- Topic: Zeb Plunger plunger tunctionality not working
- Replies: 1
- Views: 1987
Re: Zeb Plunger plunger tunctionality not working
Hi Arngrim, Have you tried just the plunger itself without any harnesses plugged into it? All units are tested as I assemble them so the z axis was working when I shipped it out. can you send me a pic of the circuit board to zeb@zebsboards.com? I'd like to make sure that there isn't any damage to th...
- Thu Aug 20, 2020 1:53 pm
- Forum: V3 Support
- Topic: plunger doesnt pull to the end in fx3
- Replies: 1
- Views: 2103
Re: plunger doesnt pull to the end in fx3
I'm assuming that in the control panel applet for the gamepad settings you are getting full draw registering in the scales at the top? If yes then the issue is with calibrating the axis in the xbox360ce software. I haven't looked at that in some time as I don't officially support PBFX3 installations...
- Thu Aug 20, 2020 1:49 pm
- Forum: V3 Support
- Topic: PC hangs on startup/reboot unless Plunger is unplugged.
- Replies: 2
- Views: 3950
Re: PC hangs on startup/reboot unless Plunger is unplugged.
The issue is that the plunger is a partial keyboard. When the computer is booting the plunger already has booted and appears as a keyboard but doesn't respond in the expected manner. This causes Windows to search for a matching device and causes the hang. The solution is to turn off USB charging in ...
- Wed May 20, 2020 9:56 pm
- Forum: V3 Support
- Topic: No solenoid activation during gameplay
- Replies: 5
- Views: 3650
Re: No solenoid activation during gameplay
LOL... I wish there were a bunch of guys here, it would definitely give me some more time.
Glad to hear that you got it going, hopefully it's clear sailing for you from here forward. It might be a good time to clone your drive so that you have a backup.
Glad to hear that you got it going, hopefully it's clear sailing for you from here forward. It might be a good time to clone your drive so that you have a backup.
- Wed May 20, 2020 10:06 am
- Forum: V3 Support
- Topic: No solenoid activation during gameplay
- Replies: 5
- Views: 3650
Re: No solenoid activation during gameplay
The best approach is to install DOF and the backglass server (using mjr's R3+++ is the easiest manner as it does it all for you) and then go to the dofconfigtool on vpuniverse.com and generate your files. Unzip the files that you get from there and put the directoutput_30 (or whatever name you downl...
- Tue May 19, 2020 2:26 pm
- Forum: V3 Support
- Topic: No solenoid activation during gameplay
- Replies: 5
- Views: 3650
Re: No solenoid activation during gameplay
I'll need to know which version the kit is as Monster Arcades has been buying kits for several years and through several iterations.
V2 Used a pacled64
V3 uses my own boards (ledwiz compatible).
V2 Used a pacled64
V3 uses my own boards (ledwiz compatible).
- Tue May 19, 2020 2:24 pm
- Forum: V3 Support
- Topic: Nudge stops working sometimes
- Replies: 1
- Views: 2292
Re: Nudge stops working sometimes
It shouldn't be doing that. The way the plunger works (with regard to nudging) is that it takes a constant sampling of the accelerometer position and reports it back to the computer unless the plunger rod is in motion. When the rod is in motion it stops reporting the accelerometer readings and repor...
- Tue May 12, 2020 7:11 pm
- Forum: V3 Support
- Topic: Pause Button in VPX
- Replies: 2
- Views: 2840
Re: Pause Button in VPX
In VPX specifically I would think that you would need to make sure that the Disable ESC Key box is not ticked in the preferences screen.
There are a few threads on getting pause to work, it usually is controlled by the frontend ..... https://www.vpforums.org/index.php?showtopic=43064
There are a few threads on getting pause to work, it usually is controlled by the frontend ..... https://www.vpforums.org/index.php?showtopic=43064