Zebsboards Forum

Wiring Diagram for the 2nd generation opto flipper boards with the onboard DC/DC converter



File hosted by Zebsboards Forum

Excellent, glad that it is working for you now!!

Sorry, didn't get notification on this post, seems to be hit and miss. Make sure that you have 4 ledwiz devices selected in the account page of the configtool (even if you only have this one board) and that you are assigning the shaker motor to output 1 on ledwiz device 4 (in the manual I have a scr...

No worries,

All of the documentation for everything is posted at the top of the board here in the Product Information Category

For those who can't get enough of fiddling with settings ...

click HERE to download DXTweak2

Hi,

This is covered in the installation manual under the "Serial Control" section.

ext/dmzx/fileupload/files/3671fe9144a88 ... 9006c1.pdf

Basically you run a batch file that does the mode switching for you without needing to connect an external controller.

What version of plunger is it? The only hardware issue that comes to mind offhand is that the analog axis (x, y, z) all use 3.3v from the onboard regulator circuit. If that goes away, then those axis won't respond. To check for 3.3v test pin 1 on the circuit board at the backside of the potentiomete...

I have the parts to possibly repair it but I have no blanks as that version has reached its EOL.

Hi Hollis,

From what you described you have shorted the microcontroller chip by applying 12V+ to the input (which is 5v negative) which most certainly has fried the board. How long it was shorted for makes no difference as the damage would have been instantaneous.

See this post in the plunger support section

viewtopic.php?f=27&t=5&p=5#p5