As I can no longer find the time to combat the continued attacks on the forums they will be closed over the next few weeks. Assistance emails can be sent to support@zebsboards.com however, please be patient as I am currently focused on efforts to get the store functioning properly. Thank you for your understanding.

Y Axis Nudge Not Working

Post V3 Plunger Questions and Requests For Assistance here
Locked
mrorange
Posts: 2
Joined: Fri May 31, 2019 6:28 pm

Y Axis Nudge Not Working

Post by mrorange » Mon Sep 28, 2020 11:15 pm

I noticed that my Y axis nudge isn't working. X axis and plunger are okay. Any idea on what could be causing this issue? Please let me know if you need more information.
Top
User avatar
Zebulon
Site Admin
Posts: 144
Joined: Fri Apr 19, 2019 9:28 pm

Re: Y Axis Nudge Not Working

Post by Zebulon » Thu Oct 01, 2020 8:52 am

Take the plunger out of the cabinet and try it in your hand by moving it around (tip it left right up and down). If the y axis doesn't move in the windows gamepad control screen then there is an issue with the accelerometer circuit that will need to be repaired.

If it needs repair you can contact me at office@zebsboards.com and we will figure it out from there.
Top
mrorange
Posts: 2
Joined: Fri May 31, 2019 6:28 pm

Re: Y Axis Nudge Not Working

Post by mrorange » Wed Oct 07, 2020 5:35 pm

You're right. I tested outside of the cabinet and Y axis is working fine. I'll try to make some adjustments in Visual Pinball.
Top
Locked

Return to “V3 Support”