Zebsboards Forum

Hello all, I finally “finished” my cab build. I am however having a fairly large problem. I have a Zebsboard it works with Future Pinball GREAT!!! I got everything but the plunger to work in Pinball FX3. But, every time I try a table in Visual Pinball 10 it stops working. The board is still functioning (I can and have reassigned all the keys correctly tested in notepad as well) but if the board is plugged in the game wont work. It acts very similarly to a rom problem … plunger works audio from table I can get the drop coin audio if I push the start game button, but it wont work. If I unplug the board and re-load the table everything (even my new button layout works great). I saw on another forum post it was suggested to change the com port #, so I did still have the same problem. I changed it to 268 or something crazy high like that. It was 3.

I'm assuming that you're using Freezy's dmd script here. Change the com port for the plunger back to com 3 (what windows set it up as) and change the virtual com port in the script settings.ini file to something not in use by hardware (com 4, 5, whatever).

That Worked Thank you SO much!!!