Hi,
I'm probably going to purchase the EZinstall kit at some point but I have a few questions I'd like to ask if possible.
1. How many 5m LED 12v strips can I connect to this? (note: I am planning on purchasing your strobe bar too)
2. Can I connect all my buttons directly to this kit or would I need another controller board?
I want to make the DOF part of the build as painless as possible and I believe you're kit is the way to go.
Look forward to your feedback.
Thanks
As I can no longer find the time to combat the continued attacks on the forums they will be closed over the next few weeks. Assistance emails can be sent to support@zebsboards.com however, please be patient as I am currently focused on efforts to get the store functioning properly. Thank you for your understanding.
A few questions from a complete noob
Re: A few questions from a complete noob
Hi,
Sorry for the late reply, I didn't get a notification on this and it's a pretty quiet forum most days.
The lighting board itself is capable of only 1 5m 12V RGB ledstrip but since there are 12 High power outputs that are open after the kit is assembled it's an easy matter to use 3 of those and connect as many ledstrips as you like to them (the outputs on the HP board are capable of far more than what I list as the max).
You can connect your buttons, once again, if you move the led strips to the HP board you would have 7 button outputs available on the lighting board, more than enough for the standard cabinet configuration.
The best way to contact me directly is through email at zeb@zebsboards.com as it's always hit or miss as to when I check in on forums in general.
Thanks!!
Sorry for the late reply, I didn't get a notification on this and it's a pretty quiet forum most days.
The lighting board itself is capable of only 1 5m 12V RGB ledstrip but since there are 12 High power outputs that are open after the kit is assembled it's an easy matter to use 3 of those and connect as many ledstrips as you like to them (the outputs on the HP board are capable of far more than what I list as the max).
You can connect your buttons, once again, if you move the led strips to the HP board you would have 7 button outputs available on the lighting board, more than enough for the standard cabinet configuration.
The best way to contact me directly is through email at zeb@zebsboards.com as it's always hit or miss as to when I check in on forums in general.
Thanks!!
Re: A few questions from a complete noob
Thanks,
I will probably email you with an example of the table I want to build.
You can then possibly tell me what other boards I'll need two buy, if that works for you.
Thanks
I will probably email you with an example of the table I want to build.
You can then possibly tell me what other boards I'll need two buy, if that works for you.
Thanks
Re: A few questions from a complete noob
Hi again,
Email would definitely be the best way to go.
Drop me a line and I'll work it out with you.
Thanks!!
Email would definitely be the best way to go.
Drop me a line and I'll work it out with you.
Thanks!!