Upgrading to the correct firmware

Post V3 Plunger Questions and Requests For Assistance here
Post Reply
matteby1
Posts: 2
Joined: Sun Jan 19, 2020 1:45 pm

Upgrading to the correct firmware

Post by matteby1 » Tue Jan 28, 2020 10:07 pm

Hi,
I hope Ive searched enough for the answers and don't come across as a total idiot..

I cant seem to get the firmware update to take. Im running Windows 10, and am trying to upgrade the firmware, or looking for any answers as to why my controller only has 4 buttons available (in properties, as well as in Future Pinball)

I have gone through the forums, and just cant seem to find an answer, hope someone can help.

Thanks!


My Plunger info :ZB V3 R3.2 A10K

User avatar
Zebulon
Site Admin
Posts: 116
Joined: Fri Apr 19, 2019 9:28 pm

Re: Upgrading to the correct firmware

Post by Zebulon » Wed Jan 29, 2020 1:33 pm

Unfortunately I haven't had a chance to update the A10K firmware to the newest version yet. Hopefully I will have a chance next week.

matteby1
Posts: 2
Joined: Sun Jan 19, 2020 1:45 pm

Re: Upgrading to the correct firmware

Post by matteby1 » Wed Jan 29, 2020 7:43 pm

Thanks for getting back to me. I'll look for the upgrade and keep working at this.

User avatar
Zebulon
Site Admin
Posts: 116
Joined: Fri Apr 19, 2019 9:28 pm

Re: Upgrading to the correct firmware

Post by Zebulon » Thu Jan 30, 2020 7:29 am

This is the correct diagram for the firmware revision that you have ...

viewtopic.php?f=27&t=8

Post Reply